In addition to the required yield strength, tensile strength and elongation of CCS AH32 ship steel plate, it also requires toughness (AKV value) at low temperatures. In addition, CCS AH32 ship steel plate must have good welding performance. Then starting
2021-07-07
The study shows that the programming method of parts on ASTM A131 DH36 steel plate plays a decisive role in the machining quality of cutting parts. It can be divided into three aspects: the influence of cutting sequence, the influence of cutting direction
2021-06-24
According to different thickness of ASTM A131 DH36 steel plate, different cutting speed, cutting gas pressure and cutting nozzle type should be adopted.Before cutting ASTM A131 DH36 steel plate, transverse and longitudinal incisions should be made, and th
2021-06-24
The S355 steel plate used for cutting and cutting shall pass the inspection and acceptance of the quality department, and its indicators shall meet the corresponding provisions of the specification. The grade, thickness and surface quality of the S355 ste
2021-06-24
When automatic cutting is carried out, the S355 steel plate is hoisted to the gas cutting platform. The distance difference between the two ends of one side of the S355 steel plate and the guide rail should be adjusted within 5mm.During semi-automatic cut
2021-06-24
Weld surface of ASTM A131 B steel plate shall be flat and smooth, with the same width of weld seam, and the remaining height shall meet the process requirements. ASTM A131 B steel plate surface should be free of porosity, cracks, underbite defects.
2021-05-26