The scientific name of CCS A marine steel plate is general strength hull structural steel (Class A). CCS A marine steel plate carbon C: ≤ 21% silicon Si: ≤ 0.50% manganese Mn: ≥ 2.5% C phosphorus P: ≤ 0.035% sulfur s: ≤ 0.035% ALS: -; Q235A steel plate ca
2021-03-01
Available DH36 steel plate specification range: thickness 8-650mm, width 1500-4020mm, length 4000mm-17000mm. Available for DH36 steel plate heat treatment process: controlled rolling, normalizing, tempering, normalizing and tempering, quenching and temper
2021-03-01
AH36 steel plate is normal temperature steel and DH36 steel plate is low temperature steel. AH36 steel plate and DH36 steel plate refer to the hot rolled steel plates produced according to the construction specifications of Classification Society for the
2021-02-22
Common Strength - Class A, B, D, CS, and E steel has A minimum yield strength of 235 MPa.The impact temperature of Class A steel is 20°C, Class B and AH is 0°C, Class D and DH is -20°C, Class E, CS and EH is -40°C, and Class FH is -60°C.
2021-02-22
The microstructure and properties of EH36 marine steel plate with controlled rolling and controlled cooling at different cooling rates were studied. The microstructure and properties of EH36 marine steel plate with controlled rolling and controlled coolin
2021-02-22
The marine plates CCS A steel plate and CCS B steel plate are not a specific material, but are A-class and B-class ship plates certified by China Classification Society. Both CCS A steel plate and CCS B steel plate are structural steel plates for general-
2021-02-22